|
Post by srtcuda on Nov 19, 2014 22:51:34 GMT -7
I still need to get with Berry to help with my drive shaft loop install. The bolt holes need to be drilled and tapped.
|
|
|
Post by Backes07 on Nov 28, 2014 20:55:51 GMT -7
Planning to add new rims, lower, and redip a new color
|
|
|
Post by Backes07 on Nov 28, 2014 20:56:16 GMT -7
Planning to add new rims, lower, and redip a new color And possibly upgrade the brakes to R1 Concepts
|
|
|
Post by srtcuda on Nov 30, 2014 9:03:16 GMT -7
Right now I got some billet products and a stage 1 hop not kit. Working on getting a Hurst short throw shifter. I plan on getting a line lock kit and possibly getting a upgraded throttle body.
|
|
|
Post by frenicx on Dec 3, 2014 22:03:53 GMT -7
Hey all, I don't post here much, but I've got a few mods lined up for the gomango changer. The following are purchased and waiting to go in..
Devil's own water/meth kit (need progessive controller and bigger tips) Paramount stage 3 trans with trans brake option 3400 stall, nhra flex plate Paramount TCM 2step launch control from Stage6 motorsports..
And the ones I haven't purchased yet and am undecided upon
Driveshaft (chromoly or carbon fiber 1 piece) Diff and gears (probably 8.8 conversion with 3.08 or 3.23) 1400hp half shafts Slicks on 17s.
And some "oh shit" handles for passengers.
It's gonna be a hell of a project to do in my garage, but I did my Dakota hemi swap with a come-along in my rafters and these two hands.. so I can hack it.
|
|
|
Post by srt801 on Dec 4, 2014 13:41:33 GMT -7
Hey all, I don't post here much, but I've got a few mods lined up for the gomango changer. The following are purchased and waiting to go in.. Devil's own water/meth kit (need progessive controller and bigger tips) Paramount stage 3 trans with trans brake option 3400 stall, nhra flex plate Paramount TCM 2step launch control from Stage6 motorsports.. And the ones I haven't purchased yet and am undecided upon Driveshaft (chromoly or carbon fiber 1 piece) Diff and gears (probably 8.8 conversion with 3.08 or 3.23) 1400hp half shafts Slicks on 17s. And some "oh shit" handles for passengers. It's gonna be a hell of a project to do in my garage, but I did my Dakota hemi swap with a come-along in my rafters and these two hands.. so I can hack it. Oh my goodness, someone has quite the build going on! It is finally nice to see this car perform at its full potential, glad to see you are finishing it up Preston. She is going to be a beast, that is for sure. If I have free time during the winter, let me know when you start wrenching, I would love to come over, help out, grab and drink cold beer, direct, supervise, etc...
|
|
|
Post by frenicx on Dec 4, 2014 14:18:33 GMT -7
Hey all, I don't post here much, but I've got a few mods lined up for the gomango changer. The following are purchased and waiting to go in.. Devil's own water/meth kit (need progessive controller and bigger tips) Paramount stage 3 trans with trans brake option 3400 stall, nhra flex plate Paramount TCM 2step launch control from Stage6 motorsports.. And the ones I haven't purchased yet and am undecided upon Driveshaft (chromoly or carbon fiber 1 piece) Diff and gears (probably 8.8 conversion with 3.08 or 3.23) 1400hp half shafts Slicks on 17s. And some "oh shit" handles for passengers. It's gonna be a hell of a project to do in my garage, but I did my Dakota hemi swap with a come-along in my rafters and these two hands.. so I can hack it. Oh my goodness, someone has quite the build going on! It is finally nice to see this car perform at its full potential, glad to see you are finishing it up Preston. She is going to be a beast, that is for sure. If I have free time during the winter, let me know when you start wrenching, I would love to come over, help out, grab and drink cold beer, direct, supervise, etc... Haha. Sure thing, I'm sure I could use the motivational support. I know that car has a safe 900hp in it, just gotta warm it up a bit, buy it a couple drinks.. 100 proof methanol should do the trick.. and chase it with some race fuel. It's gonna be on jackstands and ramps by the middle of January for sure, maybe sooner. I've never dealt with FI before except what I've learned with this car, so stripping the turbos out of the way is where I'll get my learning done. The rest is cake.
|
|
|
Post by Deleted on Dec 4, 2014 21:47:10 GMT -7
Awesome to here on that charger. Shawn good to hear you have a few things going on as well.
|
|
|
Post by srtcuda on Dec 5, 2014 10:22:08 GMT -7
There are great mods coming for some members. Frenicx I have a fuel pressure sensor for you.
|
|